Radio lamp 6Н1П-ЕВ double miniature triode of increased durability, reliability and mechanical strength. Intended for amplifying low-frequency voltage. It is used in low-frequency pre-stages, phase inverters and scanning stages of television receivers.

Main technical characteristics:

The glow voltage is 6.3 ±0.6 V

Incandescence current 600 ±50 mA

The anode voltage is nominal (constant) 250 V

The maximum anode voltage (constant) is 300 V

The anode current of each triode is 7.5 ±1.5 mA

The cathode current of each triode is limited to 25 mA

Grid voltage at an anode current of 10 μA -20 V

The reverse current of the grid is 0.5 μA

The voltage between the cathode and the heater is a limit (constant) of 250 V

The maximum power dissipated by each anode is 2.2 W

The steepness characteristic of each triode is 4.45 ±0.65 mA / V

The voltage between the anodes is no more than 2.5 V

The amplification factor of each triode is 35 ±7

The resistance in the circuit of each cathode for automatic shift is 600 ohms

The maximum resistance in the grid circuit is 1 MΩ

The input capacitance of each triode is 3.1 ±1.1 pF

The output capacity of the first triode is 1.75 ±0.35 pF

The output capacity of the second triode is 1.95 ±0.35 pF

The through capacitance of each triode is no more than 2.2 pF

The capacitance between the anodes is no more than 0.2 pF

Design glass miniature

Durability is not less than 5000 hours

Weight no more than 15 g