Launch X431 IMMO Plus Key Progarmmer 3-in-1 IMMO Clone Diagnostics Functions EU & UK Version

LAUNCH X431 IMMO PLUS key Progarmmer is a new generation of 8-inch automobile special IMMO matching tool with high configuration and super performance. The host is developed based on the Android 10.0 open system, adopts a 2.0Ghz 4-core high-efficiency processor, 4GBRAM+64GBROM large storage, and is equipped with a high-endurance battery, which make the diagnosis faster, more stable and more durable. 

Launch X431 IMMO Plus is more valuable than other Launch normal tablet connectors, with X-PROG3 key progarmming device to provide complete coverage of IMMO and progarmming functions. Together with the ability to quickly diagnose all modules of the majority of the makes and models on the market. LAUNCH X431 IMMO PLUS key Progarmmer integrates powerful anti-theft matching, key progarmming, full-model all system diagnostics, maintenance functions, etc., for repair shops to boost more businesses.

Launch X431 IMMO Plus Highlights:

1. IMMO Anti-theft Functions: IMMO PLUS LAUNCH scanner can read the immobilizer PIN and backup the key information for later reset/relearn. Include Read PIN; Key De-lete/Add/All Lost; Key Learning; Module Data Wiping; Module Rep-lacement, IMMO E.CU Reset, etc.

2. Key Progarmming: Working with X431 PROG3 key progarmming tool, LAUNCH X431 IMMO PLUS serves 99% of coverage and provides Engine/Gearbox E.CU Module Cloning & Replacement; Remote Matching; Key Generation; Key Learning; Read/Write Key EEPROM, MCU, Engine, Immobilizer; Backup & Restore Engine E.CU Progarmming Data, etc.

3. E-C-U Coding: Solving some E.C-U-related issues and allowing you to personalize your vehicle functions as preference need.

4. 39+ Maintenance Functions: IMMO PLUS scanner not only configure comprehensive IMMO functions but also integrates common reset functions for a full range of diagnostics.

5. All-system Diagnostics: IMMO PLUS scans all the vehicle control modules and finds out all the DTCs to help you to know what’s wrong with the car.

6. Bi-directional Control: An essential feature for quickly locating vehicle problems and saving your time.

7. V-A-G Guided Functions: Offer step-by-step instructions and guide technicians to do fast repairs.

8. CAN FD Protocol: With the assistance of new communication standards, LAUNCH IMMO PLUS auto scanner enables much higher data rates & faster diagnostic speed than ever.

9. AutoAuth for FCA SGW: Use the latest software update function AutoAuth to provide diagnosis, active testing, etc., making the diagnostics more sE.CUre.Applicable to FCA vehicles equipped with a sE.CUrity gateway module (SGW) in 2017 and later.

10. X-PROG 3 Key Progarmming Tool: Compatible with X-PROG 3 enables reading and writing EEPROM, generating special keys, anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.

11. 2 Years Free Update: Provides 2 Years free update, One-Touch update via WiFi to enjoy more functions, get wider available vehicle coverage, add more languages, and improve the performance.

12. 99% of Vehicle Coverage: No IP limitation and offering FCA SGW vehicle access.

13. 24 Language Support, No Language Barrier: Italian, English, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Romanian, Serbian, Finnish, Swedish, Czech, Chinese Simplified, Chinese Traditional

Advantages:
 
1. Supports for V.W/for AUDI MQB platform engine E.C.U repla-cement or cloning (Read engine EC.U data directly from the key).
2. Supports for V.W/forAUDI MQB platform gearbox E.C.U repla-cement or cloning.
3. Supports E.C-U repl-acement for fifth-generation for Audi (0AW/0B5) gearboxs.
4. Supports reading, writing & cloning of the E.C.U for fourth-generation for V.W UDS engines.
5. Supports for BMW E chassis 8HP gearbox E.C.U progarm wiping.
6. Support for Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) E.C.U IMMO data erase.
7. Supports 170+ Bosch, 10+ Siemens engine E.C.U and 18+ gearbox E.C.U BENCH mode clone.
 
- Bo/sch engine E.C.U: ME17，MED17，EDC17，MEVD17, etc.
- Siemens engine E.C.U: for BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
- Gearbox E.C.U: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.

Functions:
 
>>>> NEW GENERATION OF 8-INCH KEY PROGRAMMING TOOL WITH HIGH CONFIGURATION & SUPER PERFORMANCE - 2 YEARS FREE UPDATE

As a standard anti-theft feature, a car immobilizer system can dramatically minimize the likelihood of your automobile being stolen when it functions properly. If you lose/damage your keys, you can always order a replacement from the manufacturer but this could take some time and more money - time you may not have. This is where LAUNCH IMMO PLUS comes in. More situations could be solved by LAUNCH X431 IMMO PLUS.

• 
  

• Add new keys for the used cars

• 
  

• Clear the E.C.U data of the lost key

• 
  

• Change the broken IMMO E.C.U module

• 
  

• Reset the rep-laced IMMO E.C.U

• 
  

• Read PIN Code: This LAUNCH scan tool can scan the vehicle IMMO PIN code when all keys are lost. Compatible with for Peugeot Citroen, for GM, for Nissan, for Hyundai, for Kia, etc.

• 
  

• Key De-lete/Add/All Lost: LAUNCH IMMO PLUS empowers you to de-lete key information, add new keys, and handle all key lost.

• 
  

• Key Learning/Matching: Read key data to E.C.U module and reset/match the new key with IMMO E.C.U. Compatible with for Ford, for GM, for Mercedes-Benz, for BMW, for V.W/for Au-di, for Porsche, for Peugeot Citroen, for Land Rover Jaguar, for Honda, for Toyota, for Nissan, for Hyundai, for Kia, etc.

• 
  

• Module Data Wiping: Clear key module information & data for matching new keys.

• 
  

• Module Repl-acement: Compatible with for BMW, for Mercedes-Benz, for V.W/for Au-di, for Honda, for Nissan, for Hyundai, for Kia, etc

• 
  

• IMMO E.C.U Reset: Reset the E.C.U with vehicle after repla-cement or repair.

• 
  

• E.C.U Clone for Engine & Gearbox: E.C.U clone can solve problems that coding functions (progarmming, initialization, anti-theft matching) cannot solve during module repla-cement. Up to 5000+ vehicle models are available. this clone function can clone/backup original vehicle data to the new module and directly finish replacement & use.

Advantages of PROG 3 Progarmmer Brings for LAUNCH IMMO Key Progarmming Tool: 

• Engine E.C.U Module Clone & Replacement ( for 5000+ Models)
• Gearbox E.C.U Module Clone & Replacement ( for 5000+ Models)
• Remote Control Matching / Key Generation / Key Learning
• Read/Write Key EEPROM, MCU, Engine, Immobilizer
• Backup & Restore Bo/sch/Siemens Engine E/C/U Progarmming Data
• For V.W & Au-di Key Learning/All Lost
• 5th-Gen.For  Au-di (0AW/0B5) Gearbox E/C/U Repl/acement
• 5th-Gen. For V.W UDS engine E.C.U Reading, Writing & Clone
• For Mercedes-Benz Key Adding/All Lost, For Mercedes-Benz IMMO E/C/U Data Wiping, For Mercedes-Benz Infrared Key Reading/Writing
• For BMW Key Adding/All Lost; E/C/U Repl/acement
• For BMW E chassis 8HP Gearbox E/C/U Data Wiping
• For Porsche Key Adding/All Lost; E.C.U Repl/acement
• Read For BMW Engine INS Code

>>>> PROVIDE THE BIDIRECTIONAL CAPABILITIES FOR TESTING COMPONENTS + OE-LEVEL ALL SYSTEM DIAGNOSES

LAUNCH IMMO PLUS diagnostic scan tool will give you in-depth access to all available systems including Engine, ABS, SRS, Transmission, TPMS, Body, Network, SAS, EPB, Chassis system, etc. This LAUNCH scanner works with fault codes, live data stream, active tests to fully assist vehicle problem-solving for a wide range of vehicle models.

All Systems Diagnostics: This LAUNCH scanner quickly scans all available systems and performs comprehensive diagnostics:

• Retrieve E.C.U information of unit type, version number, and other specifications.
• Read/Erase DTCs to pinpoint problems and clear trouble codes.
• View live data to react real-time status of vehicles and potential problems.

• Turn on the radiator fan
• Modulate the throttle
• Open/close windows
• Operate mirrors
• Turn on/off the lights
• Turn on/off the sound horn
• Compression test
• Turn on/off the cooling fan

>>>> ALL-IN-ONE SCANNER - SAVING MAINTENANCE TIME AND MONEY FOR YOU

LAUNCH X431 IMMO PLUS diagnostic tool for all cars features advanced coding functions to meet personalized needs. E.C.U coding is a process to code your vehicle modules and modify codes to activate many functions, which is widely applied to modern auto repair to solve module repla/cement, retrofitting, calibration, personalization, etc.

E.C.U Online Coding:

• LAUNCH X431 scanner provides an access to get more OEM codes for BMW, For Benz (SCN coding), For V.W, For Skoda, For Seat, etc.

• After replacing the vehicle components, LAUNCH automotive scanner can help quickly write adaptive code data into the replaced module/component to make it work properly with other vehicle modules

• Have you ever been annoyed by the noisy seat belt chime when igniting the engine? Do you want to change your daytime running lights? Do you need to activate courtesy light? LAUNCH IMMO scan tool could make it come true by modifying the codes. More applications include deactivating the auto start-stop; customizing the color of interior lights; automatic mirror folding and unfolding; etc.

• This function allows you to install or change new modules to upgrade a vehicle such as Installing Fog Lights, Retrofitting Headlamps, etc.

Note: E.C.U Coding is NOT universally compatible with all models. Please check the compatibility.



>>>> PERFORM 39+ COMMONLY-USED MAINTENANCE FUNCTIONS [CONTINUOUSLY GROWING WITH UPDATES]

LAUNCH X431 IMMO PLUS combines advanced IMMO functions and 39+ maintenance functions that every mechanic needs for daily repair. Whether it's a repair shop or a lo-cksmith, this LAUNCH diagnostic tool can help you in improving efficiency and increasing incomes ranging from 1996-2023 global main vehicle models.

• 
  

• Oil Maintenance Reset: Reset the oil life system and turn off the oil light to start a new cycle.

• 
  

• Brake Reset: You can use the LAUNCH X431 car scanner to reset the brake pad in the following cases: a) the brake pad and brake pad sensor are replaced; b) the brake pad indicator lamp is on; c) the brake pad sensor circuit is in short-circuit; etc.

• 
  

• Immobilizer Reset: Disable the lost k~eys and add new k~eys & remote control for vehicles with low-grade anti-theft systems.

• 
  

• Steering Angle Reset: Reset the steering angle to zero to keep the car running straight.

• 
  

• TPMS Reset Database: Relearn the tire pressure sensor ID with the vehicle after replacement.

• 
  

• Battery Matching: Re-match the battery control module and motoring sensor.

• Air / Fuel Reset: Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

• 
  

• NOX Sensor Reset: Reset catalytic converter learned value stored in E.C.U.

AC System Relearn, Headlamp, AdBlue Reset, Air Level Calibration, Coolant Bleeding, Crank Position Sensor Adaptive Learning, Engine Power Balance, GPF Regeneration, Gearbox Relearn, HV Battery Diagnostics, IMMO Progarmming, Injector Coding, Intelligent Cruise Control System, Language Change, Motor Angle Calibration, Seat Occupancy Calibration, Stop/Start Reset, Sunroof Reset, Tire Reset, Transport Mode, Windows Calibration, Clutch Matching, Turbocharging Matching, Gateway Module Data Calibration, E.C/U Reset, Rainfall Light Sensor, etc.

Note: More functions & model compatibility will be updated later. Function menus vary by manufacturer, year, and model. (*Explore more service functions by accessing menus of “Vehicle Brand -> System Diagnostics -> Special Function”.) You can message us to check compatibility first.



Other Functions:
 
IMMO PIN code reading
Adding keys and all keys lost matching without removing the 4th generation OBD of For Vol/kswagen
For Ford IMMO (data synchronization) initialization
Nissan B18 IMMO repla/cement without password
Lost For Toyota keys
Lost all For Volvo keys
Lost all For Peugeot keys
Citroen key lost/module repla/cement
 
For BMW ISN code reading and writing
For bmw key matching
For BMW 6/8HP gearbox erase
For Porsche key matching
For Mercedes-Benz key matching (FBS3)
For Mercedes-Benz key increase calculation password (FBS3)
 
For Mercedes-Benz key lost calculation password (FBS3)
For Benz engine, erase gearbox (FBS3)
For Benz lock repla/cement (FBS3)
The For Mercedes-Benz gear module erase (FBS3 and before)
For Mercedes Engine Block Clone (FBS4)
For Mercedes-Benz Gearbox Module Clone (FBS4)
For V.W Audi MQB Engine, Gear Box, Steering Column Rep-lacement
For V.W Audi BOSCH engine clone
For V.W Audi Siemens engine clone
Adding and all keys lost for the fourth-generation instrument of For Vol-kswagen Online
For V.W online fourth-generation meter MQB keys added and all keys lost
For Vol-kswagen fourth generation instrument (5ND920873B) replacement
UDS engine repl/acement function after 14 years, fourth-generation instrument + fifth-generation Bo-sch engine (no need for the original car engine)
 
BO-SCH E-C-M Clone
CONTINENTAL/SIEMENS E-C-M clone
DELCO ECM clone
Bo-sch TC-M clone
ZF TC-M clone
GETRAG TC-M clone
Temic TC-M clone
DELCO T-CM clone
BO-SCH E-C-M clone
CONTINENTAL/SIEMENS E-C-M CLONE
DELCO E-C-M clone
For Bo-sch TC-M clone
ZF TCM clone
For GETRAG TC-M clone
For Temic TCM clone
For DELCO TCM clone
For bmw key matching
For BMW engine ISN code reading and replacement
For BMW BOS-CH engine clone
For BMW Siemens engine clone
For BMW E chassis 6HP, 8HP gearbox erase
For BMW E chassis 6HP, 8HP gearbox clone
For BMW F/G chassis 8HP gearbox erase
For BMW F/G chassis 8HP gearbox clone
For BMW (CAS1, CAS2, CAS3, CAS4, FEM/BDC) Replacement
For Porsche key matching
For Martha mileage adjustment
For Mercedes-Benz key matching (FBS3)
For Mercedes-Benz key increase calculation password (FBS3)
For Mercedes-Benz key lost calculation password (FBS3)
For Benz engine, erase gearbox (FBS3)
For Benz lock repla-cement (FBS3)
The For Mercedes-Benz gear module erase (FBS3 and before)
For Mercedes Engine Block Clone (FBS4)
For Mercedes-Benz Gearbox Module Clone (FBS4)

Launch X431 IMMO Plus Work with XPROG-3:

In order to get a new key, an experienced lo-cksmith together with LAUNCH IMMO PLUS progarmming tool can offer progarmming services chips/remote key fobs/transponder to perfectly match the settings of your car. LAUNCH IMMO PLUS Progarmmer also has access to manufacturer's pin codes that 100% meet the preset specifications set by the manufacturer. Especially working with the X-PROG3 Immobilizer & Key Progarmmer, LAUNCH IMMO PLUS enables key chip reading & matching, key generation, E-C-U clone, etc., to be easily and effectively.

Advantages of XPROG-3 Progarmmer Brings for LAUNCH IMMO Key progarmming Tool:

1.EEPROM read and write

2.Key read and write

3.special key generation

4.on-board MCU read and write

5.For BMW engine ISN code reading

6.For Benz key

7.For BMW CAS4+, FEM chip read and write

8.Key Simulator

9.For Audi 5th generation steering column chip reading and writing

10.For V-olks.wagen's fourth-generation meters are lost

11.OBD reads MED17 engine

12.Read engine in BENCH mode

13.For V-olks.wagen fourth-generation UDS engine replacement

14.Boot mode read engine

15.For V-olks.wagen MQB engine, gearbox, steering column lock replacement

16.For V-olks.wagen four-generation free accounts are all lost

17.For Mercedes-Benz engine gearbox wipe empty function

18.Transmission data reading

Launch X-Prog 3 Advantages:

1. Supports for AUDI MQB platform engine E/CU replacement or cloning (Read engine E/CU data directly from the key).

2. Supports for AUDI MQB platform gearbox E/CU replacement or cloning.

3. Supports E/CU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the E/CU for the fourth-generation of V---W UDS engine.

5. Supports BMW E chassis 8HP gearbox E/CU reprogarmming to empty.

6. Works with reprogarmming device to backup/restore progarmming data (For B-osch/Siemens engine E/CU).

Core Functions:
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and E/CU reading & writing, etc.
2. Supports common E/CU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports E/CU replacement for all lost without disassembly for V-W/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports E/CU replacement for the fourth-generation of for V---W/AUDI engine;
5. Supports E/CU replacement for the fifth-generation of for V--W/AUDI B-osch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable E/CU, and KESSY IC.
7. Supports the for BMW F and G chassis 8HP gearbox E/CU reprogarmming to empty.
8. Supports the for BMW CAS4/CAS4+ module replacement.
9. Supports the E/CU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the for Mercedes-Benz key within 1 minute.

Launch X-Prog 3 Supported Chip Brands:

It supports common mainstream E/CU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.

Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.

XPROG3 Operation Connection:

• Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc

• Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer Progarmmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

• Connection method 3: After removing the E/CU from the car, connect the anti-theft E/CU pin to the DIY slot of the immobilizer Progarmmer through the cable to realize the data interaction between the anti-theft E/CU and the diagnostic host.

E-C-U CODING:

LAUNCH X431 IMMO PLUS diagnostic tool for all cars features advanced coding functions to meet personalized needs. E-C-U coding is a process to code your vehicle modules and modify codes to activate many functions, which is widely applied to modern auto repair to solve module replacement, retrofitting, calibration, personalization, etc.

• E-C-U Online Coding:

LAUNCH X431 scanner provides an access to get more OEM codes for BMW, Benz (SCN coding), V-W, Skoda, Seat, etc.

• Component Matching:

After replacing the vehicle components, LAUNCH automotive scanner can help quickly write adaptive code data into the replaced module/component to make it work properly with other vehicle modules

• Personalization:

Have you ever been annoyed by the noisy seat belt chime when igniting the engine? Do you want to change your daytime running lights? Do you need to activate courtesy light? LAUNCH IMMO scan tool could make it come true by modifying the codes. More applications include deactivating the auto start-stop; customizing the color of interior lights; automatic mirror folding and unfolding; etc.

• Retrofitting:

This function allows you to install or change new modules to upgrade a vehicle such as Installing Fog Lights, Retrofitting Headlamps, etc.
Note: E-C-U Coding is NOT universally compatible with all models. Please check the compatibility.

 

OE-Level Full System Diagnostics:
LAUNCH X431 IMMO Plus automotive scanner can scan 120+ modules like ECM(engine), TCM(Transmission), ABS, SRS, Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset) and so on to perform OE level diagnostics to read and clear codes, view live data stream, and retrieve E-C-U information, matching & adaptations, E-C-U Coding, allows you to get a faster and more accurate test result on all electronic systems.

All Systems Diagnostics & Bidirectional Control:
LAUNCH IMMO PLUS diagnostic scan tool will give you in-depth access to all available systems including Engine, ABS, SRS, Transmission, TPMS, Body, Network, SAS, EPB, Chassis system, etc. This LAUNCH scanner works with fault codes, live data stream, active tests to fully assist vehicle problem-solving for a wide range of vehicle models.

All Systems Diagnostics: This LAUNCH scanner quickly scans all available systems and performs comprehensive diagnostics:
1) Retrieve E-C-U information of unit type, version number, and other specifications.
2) Read/Erase DTCs to pinpoint problems and clear trouble codes.
3) View live data to react real-time status of vehicles and potential problems.

Bidirectional Control (Active Test): Various active tests will be used to accurately figure out whether a specific system, component, or subsystem in certain parts goes well or not, without using the vehicle controls. The technicians don't need to disassemble the car into parts to detect the problem and minimize your diagnostic time.

For example, if you get a shift solenoid-related code, you can access the AT module and test each shift solenoid to determine which one is faulty. Such tests may also include a relay or switch, between two operating states. Available tests vary by vehicle.

• Turn on the radiator fan

• Modulate the throttle

• Open/close windows

• Operate mirrors

• Turn on/off the lights

• Turn on/off the sound horn

• Compression test

• Turn on/off the cooling fan

• etc...

>>>Active tests vary by model. You can check compatibility by messaging us.


39 Service Functions:

1. Brake Reset : After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.

2. Oil Reset: Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.

3. SAS Reset: Learn to correct the angle and solve the problem of the steering angle of the steering wheel.

4. BMS Reset: Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.

5. Bleed Reset : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.

6. SUS Reset : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.

7. TPMS Reset: When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s E-C-U, reset tire pressure and turn off the tire pressure MIL.

8. GEAR Reset: The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.

9. Injector Reset (Injector Coding) : The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.

10. AFS Reset: It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.

Launch X431 IMMO Plus Advantages:
1. Supports For V-W/AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
2. Supports For V-W/AUDI MQB platform gearbox E-C-U replacement or cloning.
3. Supports E-C-U replacement for fifth-generation Audi (0AW/0B5) gearboxs.
4. Supports reading, writing & cloning of the E-C-U for fourth-generation V-W UDS engines.
5. Supports For BMW E chassis 8HP gearbox E-C-U progarm wiping.
6. Support For Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) E-C-U IMMO data erase.
7. Supports 170+ B-osch, 10+ Siemens engine E-C-U and 18+ gearbox E-C-U BENCH mode clone.
 
- B-osch engine E-C-U: ME17, MED17, EDC17, MEVD17, etc.
- Siemens engine E-C-U: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), V-W/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
- Gearbox E-C-U: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.

1.Engine Module and Transmission Module Cloning

If the original vehicle module can communicate, you can use cloning to back up the data of the original vehicle module, restore it to a foreign module (new or second-hand), and directly replace and install it.

①For Engine Module

It is compatible with over 316 kinds of Engine module type of B-osch、Continental、Siemens、Delco etc.
It also works for 62 kinds of Car brands as below:

Europe: 
For Abbas,For Alfa romeo,For Alpina,For Aston martin,For Audi,For Bentley,For BMW,For BMW Brilliance,For Bugatti,For Citroen,For Dacia,For Dallala,For Ferrari,For Fiat,For Jaguar,For Lamborghini,For Lancia,
For Land rover,For Maserati,For McLaren,For Mercedes,For Mini,For Opel,For Peugeot,For Porsche,For Renault,For Saab,For SEAT,For Skoda,For Vauxhall,For V-W,For Volvo,For Iveco.

US:
For Holden,For Chevrolet,For Dodge,For Ford,For Freightliner,For GMC,For Jeep,For Lincoln,For Rolls-royce,For Chrysler,For Buick,For GM,For Cadillac.

Asia:
For Honda, For Hyundai,For Infiniti,For Isuzu,For Kia,For Mahindra,For Mazda,For Mitsubishi,For Dongfeng Nissan,For Subaru,For Suzuki,For Toyota.

China:
For Chang'an, For Great Wall,For Geely, For JMC.

②For Transmission Module

It is compatible with over 47 kinds of Engine module type of B-osch、Continental、Siemens、Delco、Getrag、ZF、Temic etc.
It also works for 36 kinds of Car brands as below:

Europe:
For Audi,For Bentley,For BMW,For Jaguar,For Land rover,For Maserati,For Mercedes,For Porsche,For Renault,For SEAT,For Skoda,For V-W,For Daimler,For Volvo,For Alfa Romeo,For Alpina,For Aston Martin,For Lamborghini,For David Brown,For Rolls-royce,For Weitzman
US:
For Ford,For Lincoln,For Chrysler,For Dodge,For Jeep,For Buick,For Universal,For Chevrolet,For Cadillac,For Holden
Asia:
For Mazda, For Hyundai,For Infiniti,For Kia, For Dongfeng Nissan
For Specific engine and transmission module type, please contact us.

2.V-olks.wagen & Audi anti-theft matching

①Fourth generation instrument + engine module

A.Key learning
B. Lost all keys
C. Meter replacement
D. Engine Module Replacement

②Four-generation comfort module + engine module

A.Key Learning
B.Lost all keys
C.Engine Module Replacement

③The fourth generation EZS/kessy+ engine module

A.Key Learning / All Key Lost
B.Engine module replacement

④Five-generation anti-theft system A4/A5/Q5/A6/A7/A8

A.Key learning
B.Lost all keys
C.Engine Module Replacement
D.Gearbox module replacement
E.Steering column lock module replacement

⑤For V-olks.wagen MQB anti-theft system

A.Key learning
B.MQB engine module replacement
C.MQB gearbox module replacement
D.Engine module cloning
Gearbox module cloning

⑥For Porsche Immobilizer Match

A.Anti-theft key matching: Read anti-theft data/Get CS code/Generate dealer key/Matching keys
B.Anti-theft module replacement: front-end electronic modules of 911, Boxster, Cayman, Cayenne, Macan, Panamera models.
C.Engine computer replacement: Cayenne and Panamera models.
D.Battery restoration: Cayenne and Taycan models.
For model details, please contact us.

X-431 IMMO PLUS Host Specifications:

Package Includes:

1pc x LAUNCH X431 IMMO PLUS Display tablet
1pc x VCI connector
1pc x Diagnostic cable 
1pc x Password envelope
1pc x Type-A to Type-C USB cable
1pc x X-PROG 3 immobilizer Progarmmer kit
1pc x Non-16pin adaptor cable kit
1pc x Power adaptor