To all my dear customers:
This DC Load support secondary software programming，we hope you will have the software yourself ;
If you do not have ,we can send it to you as a free gift,Software is only a gift ,not the goods ,so we hope you are professional for software using ;it is a free and development Software ；it is only for Win7 or IE system
Description:
KP182 series electronic load can be widely applied to product testing and ageing in LED lighting, power source, charger and accumulator. The current mode can be sued for simulating resistive load to discharge the battery and load the power source; the voltage mode can be used for simulating capacitive load and load the charge, as well as simulating the constant voltage of LED and load the power source. It is used simply, adjusted conveniently and has perfect protection function. The performance and function are unmatched by traditional slide wire resistor. If it is used for related industries, it could enhance productivity and reduce the cost
KP182 series product has special function and advantages:
1.It has four basic load modes like CC, CV, CW and CR .
2.Input positive and negative transposition protection and give alarm
3.Optimized heat radiation structure realizes high power density;
4.Digital control mode, high precision and good stability
5.Has overvoltage, overcurrent, overpower and overtemperature protection;
6.Voltage far-end measuring function (remote sense)
7.Auto testing function, external I/0 trigger signal, PASS, FAIL indication signal;
8.10KHz dynamic testing function;
9.Battery capacity testing function;
10.Testing of internal resistance of battery
11.Overcurrent protection point/protection time testing function
12.Fan PWM temperature control;
13.Power source 110VAC/220VAC shift use
14.RS485 and 232 communication interface, MODBUS protocol
15.Synchronous operation function of multiple loaded devices online
16.Upper computer software support with powerful function and friendly interface
Parameter:
Voltage: AC 110V ±10%
Power consumption: < 20 W
Load voltage: DC 1 -150 V
Load current: 0-40A
Load power: 0-400W
Measuring precision Current: ±0.05%+5mA
Measuring Precision Voltage: ±0.05%+5mV
Control precision Current: ±0.05%+5mA
Control precision Voltage: ±0.05%+5mV
Communication Mode：RS232/RS485
Overvoltage: When the voltage is more than 152V,the load is turned off load
Over temperature: 85℃
Overpower: Single channel 410W
Power supply input fuse 0.5
Boundary size (mm) L×B×H: 300×90×190
Weight:4.5kg
Include:
1 x set of KP184 DC Electronic Load
Note:
About the BNC interface function
Pleas know the follow function of BNC before you use this Extended function
If the voltage measurement is selected as the remote measurement (VOLTAGE REMOTE SENSE) in the menu settings, the BNC connector on the front panel must draw two wires to the positive and negative terminals of the measured voltage, otherwise the voltage measurement and display There will be inaccuracies in the error, especially when the load is loaded.
Statement:
1. Your valid phone number is a must for the shipping, otherwise we can't guarantee the package would arrive smoothly.
2. Street address is needed.
3. Any customs tax applied to this package should be covered by buyers. The price does not include any customs tax.
