Product Description
Feature:
Condition: Brand New High Quality
Color:Black
Material: Metal + Plastic
Type: TPMS
Placement on Vehicle: Front Rear Left Right
Fitment Type: Direct Replacement
Quantity: 4pcs
Gross weight: 159g
Frequency: 433MHz
Manufacture Part Number: 68249197AA
Interchange Part Number: 68157568AA
Suitable for the following models:
2014-2022 Jeep Cherokee 4 Cyl 2.4L, 6 Cyl 3.2L
2015-2018 Ram 1500 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L (can not fit 2019-2022 RAM 1500 DT-6lug)
2015-2018 Ram 2500 6 Cyl 6.7L Diesel, 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4L
2015-2018 Ram 3500 6 Cyl 6.7L Diesel, 8 Cyl 5.7L, 8 Cyl 6.4L
Program requirement:
Please use TPMS sensor tester or other reader scanner to get TPMS ID# and then upload ID# to computer to activate the tire pressure sensor. Check your owner’s manual or ask your mechanic or auto store for help if needed
Installation Steps:
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
TPMS Install:
To make sure part can fit perfectly, please read item description and check item pictures and OE# of your part. Any needed please message us or email us prior to contacting ebay. We will response within one business day.
Package includes:
4pcs Tire Pressure Sensor as pictured
■ Installation Process for reference only :
1. Loose the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
4. Usually the standard service delivery takes 15-20 working days (except weekends and holidays),If you don't receive the item in time, please contact us freely, we'll try our best to solve the delivery problem.