|
|
|
|
|
|
|
|
|
|
|
Item Description
Re-engineered to address common failure points in the original design. Our Engine Oil Dipstick is differentiated by its long-lasting handle. Constructed of tough plastic, the handle won't break or separate from the rod. Now you can perform your essential routine oil checks and changes with ease.
Clear marks on the rod promise easy-to-read oil levels
O-ring seals the top of the dipstick, prohibiting oil from escaping
Application-specific direct replacement for proper fit
Brightly-colored handle makes the dipstick easy to locate under the hood
Adjustable | No |
Gasket or Seal Included | Yes |
Handle Material | Polybutylene Terephthalate (pbt) |
Length (In) | 21.6 In. |
Material | Steel |
Tube Included | No |
Part Number | 917397, 1530120020,1530120021 |
Fitment
1994-2003 Lexus ES300 3.0L 6Cyl
2004-2006 Lexus ES330 3.3L 6Cyl
1999-2003 Lexus RX300 3.0L 6Cyl
2004-2006 Lexus RX330 3.3L 6Cyl
2006-2008 Lexus RX400h 3.3L 6Cyl
1995-2004 Toyota Avalon 3.0L 6Cyl
1994-2006 Toyota Camry 3.0L 6Cyl
2004-2006 Toyota Camry 3.3L 6Cyl
1994-1995 Toyota Camry V6 3.0L (2959cc)
2004-2010 Toyota Highlander 3.3L 6Cyl
1998-2003 Toyota Sienna 3.0L 6Cyl
2004-2006 Toyota Sienna 3.3L 6Cyl
1999-2003 Toyota Solara 3.0L 6Cyl
2004-2008 Toyota Solara 3.3L 6Cyl
How To Use
As with the original Dealer Tool
Insert into dipstick tube until the tool bottoms out, this tool will be longer than the tube itself.
Remove and check fluid level
DO NOT leave tool inside =
the dip stick tube when finished with level check.
This Tool Enables The User To Check Engine Fluid Level
1. Verify that the vehicle is parked on a level surface.
2. Remove dipstick tube cap.
3. Engage parking brake. Start engine and let it idle with gear selector in the park position.
4. Shift the tansmissisn lever through the gears several times with the vehidle stationary and engine iding.
5. Bring the vehicle up to operating temperature and check fluld level with engine iding. Push dipstick into Engine fill tube until itbottoms out against the Engine pan and puil out, read fluid levell.
NOTE: The dipstick will protrude from fil tube when insalled.
6. Check Engine fluid temperature using a scan tool.
NOTE: Accurate Engine fluid temperature can only be obtained by using a scan too with the Engine leverinreverse or any forward gear position.
7. The Engine dipstick has level indicator lines every 10mm. Check fluld level on dipstick; determine proper fluid levelusing the correct fluid level chart for your vehicle.
8. Adjust fluid level as necessary and recheck level.
9. Install dipstick tube cap after checking fluid level.
Item Specifics | |
---|---|
Brand | gdcarpartsin |
Manufacturer Part Number | GD160259C01 |
Custom Bundle | No |
Warranty | 1 Year |
Fitment Type | Direct Replacement |
Gasket or Seal Included | Yes |
Tube Included | No |
Modified Item | No |
Length | 18.135 In |
Adjustable | No |
Placement on Vehicle | Front,Left,Right |
Type | Dipstick |
Handle Material | PBT Plastic |
Material | Stainless Steel |
Total Total Length(with handle) | 21.6" |
Interchange Part Number | 917397, 1530120020,1530120021 |
Other Part Number | 15301-20020 |
Stick Total Length(without handle) | 18.4" |
Shop Category Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
For Lexus ES300 Toyota Avalon Camry Sienna Highlander Engine Oil Level Dipstick
Item Description Re-engineered to address common failure points in the original design. Our Engine Oil Dipstick is differentiated by its long-lasting handle. Constructed of tough plastic, the handle won't break or separate from the rod. Now you can perform your essential routine oil checks and changes with ease. Clear marks on the rod promise easy-to-read oil levels
Fitment 1994-2003 Lexus ES300 3.0L 6Cyl
How To Use As with the original Dealer Tool Insert into dipstick tube until the tool bottoms out, this tool will be longer than the tube itself. Remove and check fluid level DO NOT leave tool inside = the dip stick tube when finished with level check.
This Tool Enables The User To Check Engine Fluid Level 1. Verify that the vehicle is parked on a level surface. 2. Remove dipstick tube cap. 3. Engage parking brake. Start engine and let it idle with gear selector in the park position. 4. Shift the tansmissisn lever through the gears several times with the vehidle stationary and engine iding. 5. Bring the vehicle up to operating temperature and check fluld level with engine iding. Push dipstick into Engine fill tube until itbottoms out against the Engine pan and puil out, read fluid levell. NOTE: The dipstick will protrude from fil tube when insalled.
6. Check Engine fluid temperature using a scan tool. NOTE: Accurate Engine fluid temperature can only be obtained by using a scan too with the Engine leverinreverse or any forward gear position.
7. The Engine dipstick has level indicator lines every 10mm. Check fluld level on dipstick; determine proper fluid levelusing the correct fluid level chart for your vehicle. 8. Adjust fluid level as necessary and recheck level. 9. Install dipstick tube cap after checking fluid level.
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
4. If you have not received your shipment within 15 days from payment , please contact!
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer
We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1,We stand behind every product we sell.
2,All of our brand new items come with a 60-Days money-back guarantee.
3,We define the item as defective only if it doesn't function as described.
4,It is the buyer's responsibility to understand the item description before bidding.
5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
7,Shipping & handling cost are not refundable.
8,Man-made damage by abuse or wrong operation is not covered by this warranty.
9,No product liability insurance is assumed.
All rights reserved. |