|
|
|
|
|
|
1.Fit For:
2002-2006 Chevrolet Avalanche 2500
2001-2007 Chevrolet Silverado 1500 HD
2001-2004 Chevrolet Silverado 2500
1999-2000 Chevrolet Silverado 2500 4WD
2001-2010 Chevrolet Silverado 2500 HD
2001-2007 Chevrolet Silverado 3500
2007-2010 Chevrolet Silverado 3500 HD
2001-2012 Chevrolet Suburban 2500
2001-2007 GMC Sierra 1500 HD
2001-2004 GMC Sierra 2500
1999-2000 GMC Sierra 2500 4WD
2001-2010 GMC Sierra 2500 HD
2001-2007 GMC Sierra 3500
2007-2010 GMC Sierra 3500 HD
2001-2012 GMC Yukon XL 2500
2003- 2009 Hummer H2
2.Package Includes:
2 x Part # Front Upper Control Arm And Ball Joint - K620054
3.Note
Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts.
10 Year Warranty
Please check above compatibility list to make sure it fits your vehicle.
Ball Joint
Ball joints may be grouped into two classifications, load carrying and non-load carrying. Ball joints may be manufactured with forged, stamped, cold-formed, or screw-machined housings. The coil spring is seated on the control arm to which the load-carrying ball joint is attached. For example, when the coil spring is mounted between the lower control arm and the chassis, the lower ball joint is a load-carrying joint. In a torsion bar suspension, the load-carrying ball joint is mounted on the control arm to which the torsion bar is attached. A load-carrying ball joint supports the vehicle weight.
Ball Joint Replacement Guideline:
If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension.
Picture(A)
The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty.
Picture(B)
1.Raise the vehicle and remove the front wheels.
2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes.
Picture(C)
3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts.
Picture(D)
4.Loosen and remove the fixing nut of the ball joint on the steering knuckle.
Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket.
Picture(E)
5.Remove the bad or worn ball joint from the control arm.
6.Loosen the compression ball joint on the steering knuckle using a suitable special tool.
Picture(F)
7.Clean the cone connection.
Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface.
Picture(G)
8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts.
9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer.
10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary.
11.Finally, carry out a test drive.
Frequently Asked Questions
(1).How will I know that I have to renew my ball joint parts? Or replace them?
If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them.
(2).What happens if a ball joint breaks?
When a ball joint breaks, you will hear a mysterious noise inside your car wheel.
Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control.
If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious.
Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car.
(3).Are worn ball joints dangerous?
Yes, it can be quite dangerous. Because, a worn ball joint causes suspension damage, inspection failure, and breakage of related parts.
It might make your front suspension come apart while driving, so the wheels move in whatever direction inertia takes them. That can lead to a fatal accident.
(4).What happens if I don't replace ball joints?
If you don't want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new.
(5).Do I need to grease new ball joints?
I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card.
Item Specifics | |
---|---|
Placement on Vehicle | Front |
Type | Control Arm & Ball Joint Assembly |
Universal Fitment | No |
Control Arm Construction | Forged |
Items Included | Mounting Hardware |
Custom Bundle | Yes |
Interchange Part Number | K620054 |
OE/OEM Part Number | Suspension Control Arms and Ball Joints Assembly |
Superseded Part Number | Front Driver And Passenger Side Replacement |
Manufacturer Warranty | 10 Year |
Brand | cfspeed-autoparts |
Manufacturer Part Number | C80201601P |
Adjustable | Yes |
Modified Item | Yes |
Kit Parts Included | Control Arm, Ball Joint |
Kit or Single Part | Kit |
Greasable or Sealed | Greasable |
OE Spec or Performance/Custom | OE Spec |
Surface Finish | Polished, Rust Protected |
Suspension Grade | Standard |
Quantity | 2 Pcs |
Features | Greasable |
Finish | Coated |
Cotter Pin Hole | Yes |
Material | Alloy Steel |
Mounting Style | Bolt-On |
We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please.
Cfspeed-autoparts
Shop Category Picture Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
(2) Front Upper Control Arms & Ball Joints For Sierra Silverado 2500 Hummer H2
1.Fit For: 2002-2006 Chevrolet Avalanche 2500
2.Package Includes: 2 x Part # Front Upper Control Arm And Ball Joint - K620054
3.Note 10 Year Warranty
Ball Joint Ball joints may be grouped into two classifications, load carrying and non-load carrying. Ball joints may be manufactured with forged, stamped, cold-formed, or screw-machined housings. The coil spring is seated on the control arm to which the load-carrying ball joint is attached. For example, when the coil spring is mounted between the lower control arm and the chassis, the lower ball joint is a load-carrying joint. In a torsion bar suspension, the load-carrying ball joint is mounted on the control arm to which the torsion bar is attached. A load-carrying ball joint supports the vehicle weight.
Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension.
Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty.
Picture(B)
Picture(C)
Picture(D)
Picture(E)
Picture(F)
Picture(G)
Frequently Asked Questions (1).How will I know that I have to renew my ball joint parts? Or replace them?
(2).What happens if a ball joint breaks?
(3).Are worn ball joints dangerous?
(4).What happens if I don't replace ball joints?
(5).Do I need to grease new ball joints?
Payment
Shipping
Returns
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Contact Us
We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please. All rights reserved. |