DERUC PEI Sheet for 3D Printer, 3D Printing Flexible Steel Platform PEI + Steel Plate + Magnetic Bottom Sheet with Adhesive for 3D Printers Ender 3 Max/CR10/CR10S/10S Pro/V2/V3-310 x 310mm

• 【Compatibility】The size of the PEI board is 310 x 310 mm, not warped. It is suitable for CR10/CR10S,X40 IDEX/X40 V2, KP5L, S8 Pro/Plus, TL-D3 Pro, Twotrees SP-5 and other 3D printers. If your 3D printer has a 310x310mm heated bed platform, this PEI plate is compatible with your 3D printer.

• 【Easy Removal】3D printer plate 310mm can be easily removed from the surface after printing. When the temperature of the heat bed reaches room temperature, the print can be easily peeled off the surface. If the pressure is still stuck, the surface of the flexboard bends slightly and the model will fall right into your hands.

• 【Easy to use】3D printer platform is suitable for most filaments such as PLA/ PLA+/ PETG/ ABS etc., no glue, tape or other adhesives are required. Good adhesion can be achieved if the temperature of the heated bed is around 60°C. When the PEI build surface has cooled, the pressure can be easily removed by hand by gently bending the spring steel PEI. The maximum printing temperature of PEI is 100°C, it is compatible with most filaments.

• 【Double-sided availability】1 piece double-sided 3D printer magnetic printing plate (one side smooth PEI, one side textured PEI). 1 piece flexible magnetic base with self-adhesive backing. Double-sided PEI panels are manufactured using advanced technology. The front and back of PEI can be used interchangeably, increasing ease of use.