• Features:
    • 100% Brand New in Box​
    • Fits LH &RH(Driver Left Side & Passenger Right Side) Front & Rear
    • Fits 5 Lugs Wheels
    • Wheel Studs Already Installed
    • ABS Type:Non-ABS
    • Drive Type: AWD Only
    • Brand New Wheel Hub Assembly
    • Direct Replacement
    • Built To Strict Quality Control Standards
    • Replaces Dealer Part Numbers: 512301, 513225, HA590142, BR930447, HA590031, BR930446, 04779218AB, 04779218AA, 4779218AA   
    Fitments:

    • 4PCS Wheel Hub Bearing Front Rear AWD For Dodge Charger Magnum Chrysler 300 2008

    Features:

    • 100% Brand New in Box​
    • Fits LH &RH(Driver Left Side & Passenger Right Side) Front & Rear
    • Fits 5 Lugs Wheels
    • Wheel Studs Already Installed
    • ABS Type:Non-ABS
    • Drive Type: AWD Only
    • Brand New Wheel Hub Assembly
    • Direct Replacement
    • Built To Strict Quality Control Standards
    • Replaces Dealer Part Numbers: 512301, 513225, HA590142, BR930447, HA590031, BR930446, 04779218AB, 04779218AA, 4779218AA
       

    Fitments:

    • Fits Chrysler 300 2005-2008 AWD Only | 2009 27 Spline - Performance Brake Models
    • Fits Dodge Charger 2007-2008 AWD Only | 2009 27 Spline - Performance Brake Models
    • Fits Dodge Magnum 2005-2008 AWD Only
       

    Please Notes:

    • These Wheel Hub Bearings Will Only Work Properly On Vehicles With These Exact Options.

    • If Your Vehicle Does Not Have The Options Listed,  This Mirror May Not Function Properly.

     

    Item Include:

    • 4PCS Wheel Hub Bearingss LH &RH(Driver Left Side & Passenger Right Side) Front & Rear

    • Cotter Pin

    • Nut Retainer
    • Wheel Hub Lock Nut
    • Hub Bolt
    • Splash Guard
    • Steering Knuckle


    Removal:

    • Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    • Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    • Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    • Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    • Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    • Remove the engine side cover. 
    • Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle. 
    • Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    • Remove the wheel hub and bearing bolts using power tool.
    • Remove the splash guard and the wheel hub and bearing from the steering knuckle.
      NOTE:

    • Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;

    • Pull out the front wheel sensor, being careful to turn it as little as possible.
    • Do not pull on wheel sensorharness.
      ​

    Inspection after removel : Check components for deformationy,cracksy,and other damagey,and  boots of transverse link ball joint for cracksy,axial end play,and swing torque. 

     


     

    Installation: 

    • Installation is in the reverse order of the removal

     

    Caution:

    1. Do not reuse the wheel stud.
    2. Do not reuse the cotter pin.
    3. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    4. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    5. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut
    6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.
    7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.
    8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.
    9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

    Item Specifics
    Brand top-refitting
    Type Wheel Hub & Bearing Assembly
    Items Included As Picture Shown
    Manufacturer Warranty 1 Year
    Finish Polished,Rust Protected
    Performance Part No
    Universal Fitment No
    Vintage Car Part No
    Material Steel
    Wheel Stud Quantity 5
    Placement on Vehicle Front
    Manufacturer Part Number 11706337
    Flange Diameter 5.89 in. / 149.6 mm
    ABS Sensor Non-ABS
    Flange Offset 2.37 in. / 60.25 mm
    Fitment type Direct Replacement
    Anti-lock Braking System No
    Bolt Circle Diameter 4.53 in. / 115 mm
    Brake Pilot Diameter 2.85 in. / 72.4 mm
    Wheel Pilot Diameter 2.81 in. / 71.4 mm
    Fitment 1 2005 2006 2007 2008 Chrysler 300 (2009 27 Splines)
    Fitment 2 2007 2008 Dodge Charger (2009 27 Splines)
    Fitment 3 2005 2006 2007 2008 Dodge Magnum
    Hub Pilot Diameter 3.56 in. / 90.4 mm
    Bolt Pattern 5 x 115 mm
    OE/OEM Part Number 513225, 512301
    Flange Bolt Hole Quantity 4
    Wheel Stud Size M14x1.5
    Knuckle Bolt Circle Diameter 4.33 in. / 110 mm
    Flange Shape Rectangular
    Drive Type AWD Only
    Knuckle Bolt Hole Size M10x1.5

    Payment
    1.We only accept PayPal.
     
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
     
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back
    Returns
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer. to you as soon as possible with a reply. Our goal is customer satisfaction!
    Contact Us
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    Shop Category
     Store Home
     Side Marker
     led 3rd brake tail light
     LED Whip Light
     Headlight Assembly
     Fog Light
     Headlight
     Cab Marker
     Towing Mirrors
     Wheel Spacers
     AC Condenser
     Radiator
     Cooling Fan
     Wheel Bearing Hub
     Running Boards Side Steps
     Other
    Hot Item
    Picture

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    4PCS Wheel Hub Bearing Front Rear AWD For Dodge Charger Magnum Chrysler 300 2008

    Features:

    • 100% Brand New in Box​
    • Fits LH &RH(Driver Left Side & Passenger Right Side) Front & Rear
    • Fits 5 Lugs Wheels
    • Wheel Studs Already Installed
    • ABS Type:Non-ABS
    • Drive Type: AWD Only
    • Brand New Wheel Hub Assembly
    • Direct Replacement
    • Built To Strict Quality Control Standards
    • Replaces Dealer Part Numbers: 512301, 513225, HA590142, BR930447, HA590031, BR930446, 04779218AB, 04779218AA, 4779218AA
       

    Fitments:

    • Fits Chrysler 300 2005-2008 AWD Only | 2009 27 Spline - Performance Brake Models
    • Fits Dodge Charger 2007-2008 AWD Only | 2009 27 Spline - Performance Brake Models
    • Fits Dodge Magnum 2005-2008 AWD Only
       

    Please Notes:

    • These Wheel Hub Bearings Will Only Work Properly On Vehicles With These Exact Options.

    • If Your Vehicle Does Not Have The Options Listed,  This Mirror May Not Function Properly.

     

    Item Include:

    • 4PCS Wheel Hub Bearingss LH &RH(Driver Left Side & Passenger Right Side) Front & Rear

    • Cotter Pin

    • Nut Retainer
    • Wheel Hub Lock Nut
    • Hub Bolt
    • Splash Guard
    • Steering Knuckle


    Removal:

    • Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    • Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    • Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    • Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    • Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    • Remove the engine side cover. 
    • Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle. 
    • Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    • Remove the wheel hub and bearing bolts using power tool.
    • Remove the splash guard and the wheel hub and bearing from the steering knuckle.
      NOTE:

    • Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;

    • Pull out the front wheel sensor, being careful to turn it as little as possible.
    • Do not pull on wheel sensorharness.
      ​

    Inspection after removel : Check components for deformationy,cracksy,and other damagey,and  boots of transverse link ball joint for cracksy,axial end play,and swing torque. 

     


     

    Installation: 

    • Installation is in the reverse order of the removal

     

    Caution:

    1. Do not reuse the wheel stud.
    2. Do not reuse the cotter pin.
    3. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    4. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    5. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut
    6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.
    7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.
    8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.
    9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.


    1.We only accept PayPal.
     
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
     
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer. to you as soon as possible with a reply. Our goal is customer satisfaction!
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    All rights reserved.