Product Description
1.Part Number: 234-9026, 234-4260
Interchange Part Number:
234-9026, 2349026, 8946704060, 894670C030, 8946735110
234-4260, 2344260,
234-9026: 1PCS Upstream Rear; Bank 1 Sensor 1;
234-4260: 1PCS Downstream Rear; Bank 1 Sensor 2;
234-4260: 1PCS Downstream Front; Bank 2 Sensor 2
2.Warranty: 5 years; Fully Tested
3.Constructed from high quality material.
4.Manufactured with precision to meet OE standards; Easy installation.
"Please check the part number and item pics clearly, confirm suited to your needs."
Fit Vehicles:
Please see compatibility chart.
Lexus
Gx460 4.6L V8 2010 2011 2012 2013
Lx570 5.7L V8 2008 2009 2010 2011
Toyota
4Runner 4.0L V6 2007 2008 2009
Fj Cruiser 4.0L V6 2008 2009
Tacoma 4.0L V6 2005 2006 2007 2008
Tundra
4.0L V6 2005 2006 2007 2008 2009 2010
4.6L V8 2010 2011 2012 2013
4.7L V8 2007 2008 2009
5.7L V8 2007 2008 2009 2010 2011
Sequoia
4.6L V8 2010 2011 2012
4.7L V8 2008 2009
5.7L V8 2008 2009 2010 2011
Land Cruiser 5.7L V8 2008 2009 2010 2011
Q: How do I know the O2 sensor is good or not ?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
1- Disconnect the battery.
2- Locate the sensor connector by following its wires. Disconnect it.?
3- Remove the sensor cable from its clips all along its way to the sensor.
4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.
5- Remove the sensor and fit the new one.
6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.
7- Reconnect the battery and wait 5 minutes before starting the engine.